Effects of three-dimensional bioprinting antibacterial hydrogel on full-thickness skin defect wounds in rats / 中华烧伤杂志

Objective: To explore the effects of three-dimensional (3D) bioprinting gelatin methacrylamide (GelMA) hydrogel loaded with nano silver on full-thickness skin defect wounds in rats. Methods: The experimental research method was adopted. The morphology, particle diameter, and distribution of silver nanoparticles in nano silver solution with different mass concentrations and the pore structure of silver-containing GelMA hydrogel with different final mass fractions of GelMA were observed by scanning electron microscope and the pore size was calculated. On treatment day 1, 3, 7, and 14, the concentration of nano silver released from the hydrogel containing GelMA with final mass fraction of 15% and nano silver with final mass concentration of 10 mg/L was detected by mass spectrometer. At 24 h of culture, the diameters of inhibition zone of GelMA hydrogel containing final mass concentration of 0 (no nano silver), 25, 50, and 100 mg/L nano silver against Staphylococcus aureus and Escherichia coli were detected. Fibroblasts (Fbs) and adipose stem cells (ASCs) were isolated respectively by enzymatic digestion using the discarded prepuce after circumcision from a 5-year-old healthy boy who was treated in the Department of Urology of the Second Affiliated Hospital of Zhejiang University School of Medicine in July 2020, and the discarded fat tissue after liposuction from a 23-year-old healthy woman who was treated in the Department of Plastic Surgery of the Hospital in July 2020. The Fbs were divided into blank control group (culture medium only), 2 mg/L nano sliver group, 5 mg/L nano sliver group, 10 mg/L nano sliver group, 25 mg/L nano sliver group, and 50 mg/L nano sliver group, which were added with the corresponding final mass concentrations of nano sliver solution, respectively. At 48 h of culture, the Fb proliferation viability was detected by cell counting kit 8 method. The Fbs were divided into 0 mg/L silver-containing GelMA hydrogel group, 10 mg/L silver-containing GelMA hydrogel group, 50 mg/L silver-containing GelMA hydrogel group, and 100 mg/L silver-containing GelMA hydrogel group and then were correspondingly treated. On culture day 1, 3, and 7, the Fb proliferation viability was detected as before. The ASCs were mixed into GelMA hydrogel and divided into 3D bioprinting group and non-printing group. On culture day 1, 3, and 7, the ASC proliferation viability was detected as before and cell growth was observed by live/dead cell fluorescence staining. The sample numbers in the above experiments were all 3. Four full-thickness skin defect wounds were produced on the back of 18 male Sprague-Dawley rats aged 4 to 6 weeks. The wounds were divided into hydrogel alone group, hydrogel/nano sliver group, hydrogel scaffold/nano sliver group, and hydrogel scaffold/nano sliver/ASC group, and transplanted with the corresponding scaffolds, respectively. On post injury day (PID) 4, 7, 14, and 21, the wound healing was observed and the wound healing rate was calculated (n=6). On PID 7 and 14, histopathological changes of wounds were observed by hematoxylin eosin staining (n=6). On PID 21, collagen deposition of wounds was observed by Masson staining (n=3). Data were statistically analyzed with one-way analysis of variance, analysis of variance for repeated measurement, Bonferroni correction, and independent sample t test. Results: The sliver nano particles in nano silver solution with different mass concentrations were all round, in scattered distribution and uniform in size. The silver-containing GelMA hydrogels with different final mass fractions of GelMA all showed pore structures of different sizes and interconnections. The pore size of silver-containing GelMA hydrogel with 10% final mass fraction was significantly larger than that of silver-containing GelMA hydrogels with 15% and 20% final mass fractions (with P values both below 0.05). On treatment day 1, 3, and 7, the concentration of nano silver released from silver-containing GelMA hydrogel in vitro showed a relatively flat trend. On treatment day 14, the concentration of released nano silver in vitro increased rapidly. At 24 h of culture, the diameters of inhibition zone of GelMA hydrogel containing 0, 25, 50, and 100 mg/L nano silver against Staphylococcus aureus and Escherichia coli were 0, 0, 0.7, and 2.1 mm and 0, 1.4, 3.2, and 3.3 mm, respectively. At 48 h of culture, the proliferation activity of Fbs in 2 mg/L nano silver group and 5 mg/L nano silver group was both significantly higher than that in blank control group (P<0.05), and the proliferation activity of Fbs in 10 mg/L nano silver group, 25 mg/L nano silver group, and 50 mg/L nano silver group was all significantly lower than that in blank control group (P<0.05). Compared with the that of Fbs in 0 mg/L silver-containing GelMA hydrogel group, the proliferation activity of Fbs in 50 mg/L silver-containing GelMA hydrogel group and 100 mg/L silver-containing GelMA hydrogel group was all significantly decreased on culture day 1 (P<0.05); the proliferation activity of Fbs in 50 mg/L silver-containing GelMA hydrogel group was significantly increased (P<0.05), while the proliferation activity of Fbs in 100 mg/L silver-containing GelMA hydrogel group was significantly decreased on culture day 3 (P<0.05); the proliferation activity of Fbs in 100 mg/L silver-containing GelMA hydrogel group was significantly decreased on culture day 7 (P<0.05). The proliferation activity of ASCs in 3D bioprinting group show no statistically significant differences to that in non-printing group on culture day 1 (P>0.05). The proliferation activity of ASCs in 3D bioprinting group was significantly higher than that in non-printing group on culture day 3 and 7 (with t values of 21.50 and 12.95, respectively, P<0.05). On culture day 1, the number of dead ASCs in 3D bioprinting group was slightly more than that in non-printing group. On culture day 3 and 5, the majority of ASCs in 3D bioprinting group and non-printing group were living cells. On PID 4, the wounds of rats in hydrogel alone group and hydrogel/nano sliver group had more exudation, and the wounds of rats in hydrogel scaffold/nano sliver group and hydrogel scaffold/nano sliver/ASC group were dry without obvious signs of infection. On PID 7, there was still a small amount of exudation on the wounds of rats in hydrogel alone group and hydrogel/nano sliver group, while the wounds of rats in hydrogel scaffold/nano sliver group and hydrogel scaffold/nano sliver/ASC group were dry and scabbed. On PID 14, the hydrogels on the wound surface of rats in the four groups all fell off. On PID 21, a small area of wounds remained unhealed in hydrogel alone group. On PID 4 and 7, the wound healing rates of rats in hydrogel scaffold/nano sliver/ASC group were significantly higher than those of the other three groups (P<0.05). On PID 14, the wound healing rate of rats in hydrogel scaffold/nano sliver/ASC group was significantly higher than the wound healing rates in hydrogel alone group and hydrogel/nano sliver group (all P<0.05). On PID 21, the wound healing rate of rats in hydrogel alone group was significantly lower than that in hydrogel scaffold/nano sliver/ASC group (P<0.05). On PID 7, the hydrogels on the wound surface of rats in the four groups remained in place; on PID 14, the hydrogel in hydrogel alone group was separated from the wounds of rats, while some hydrogels still existed in the new tissue of the wounds of rats in the other three groups. On PID 21, the collagen arrangement in the wounds of rats in hydrogel alone group was out of order, while the collagen arrangement in the wounds of rats in hydrogel/nano sliver group, and hydrogel scaffold/nano sliver/ASC group was relatively orderly. Conclusions: Silver-containing GelMA hydrogel has good biocompatibility and antibacterial properties. Its three-dimensional bioprinted double-layer structure can better integrate with new formed tissue in the full-thickness skin defect wounds in rats and promote wound healing.

Effects of in situ cross-linked graphene oxide-containing gelatin methacrylate anhydride hydrogel on wound vascularization of full-thickness skin defect in mice / 中华烧伤杂志

Objective: To prepare graphene oxide (GO)-containing gelatin methacrylate anhydride (GelMA) hydrogel and to investigate the effects of in situ photopolymerized GO-GelMA composite hydrogel in wound vascularization of full-thickness skin defect in mice. Methods: The experimental study method was used. The 50 μL of 0.2 mg/mL GO solution was evenly applied onto the conductive gel, and the structure and size of GO were observed under field emission scanning electron microscope after drying. Human skin fibroblasts (HSFs) were divided into 0 μg/mL GO (without GO solution, the same as below) group, 0.1 μg/mL GO group, 1.0 μg/mL GO group, 5.0 μg/mL GO group, and 10.0 μg/mL GO group treated with GO of the corresponding final mass concentration, and the absorbance value was detected using a microplate analyzer after 48 h of culture to reflect the proliferation activity of cells (n=6). HSFs and human umbilical vein vascular endothelial cells (HUVECs) were divided into 0 μg/mL GO group, 0.1 μg/mL GO group, 1.0 μg/mL GO group, and 5.0 μg/mL GO group treated with GO of the corresponding final mass concentration, and the migration rates of HSFs at 24 and 36 h after scratching (n=5) and HUVECs at 12 h after scratching (n=3) were detected by scratch test, and the level of vascular endothelial growth factor (VEGF) secreted by HSFs after 4, 6, and 8 h of culture was detected by enzyme-linked immunosorbent assay method (n=3). The prepared GO-GelMA composite hydrogels containing GO of the corresponding final mass concentration were set as 0 μg/mL GO composite hydrogel group, 0.1 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group to observe their properties before and after cross-linking, and to detect the release of GO after soaking with phosphate buffer solution for 3 and 7 d (n=3). The full-thickness skin defect wounds were made on the back of 16 6-week-old female C57BL/6 mice. The mice treated with in situ cross-linked GO-GelMA composite hydrogel containing GO of the corresponding final mass concentration were divided into 0 μg/mL GO composite hydrogel group, 0.1 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group according to the random number table, with 4 mice in each group. The general condition of wound was observed and the wound healing rate was calculated on 3, 7, and 14 d of treatment, the wound blood perfusion was detected by laser Doppler flowmetry on 3, 7, and 14 d of treatment and the mean perfusion unit (MPU) ratio was calculated, and the wound vascularization on 7 d of treatment was observed after hematoxylin-eosin staining and the vascular density was calculated (n=3). The wound tissue of mice in 0 μg/mL GO composite hydrogel group and 0.1 μg/mL GO composite hydrogel group on 7 d of treatment was collected to observe the relationship between the distribution of GO and neovascularization by hematoxylin-eosin staining (n=3) and the expression of VEGF by immunohistochemical staining. Data were statistically analyzed with analysis of variance for repeated measurement, one-way analysis of variance, and Tukey's method. Results: GO had a multilayered lamellar structure with the width of about 20 μm and the length of about 50 μm. The absorbance value of HSFs in 10.0 μg/mL GO group was significantly lower than that in 0 μg/mL GO group after 48 h of culture (q=7.64, P<0.01). At 24 h after scratching, the migration rates of HSFs were similar in the four groups (P>0.05); at 36 h after scratching, the migration rate of HSFs in 0.1 μg/mL GO group was significantly higher than that in 0 μg/mL GO group, 1.0 μg/mL GO group, and 5.0 μg/mL GO group (with q values of 7.48, 10.81, and 10.20, respectively, P<0.01). At 12 h after scratching, the migration rate of HUVECs in 0.1 μg/mL GO group was significantly higher than that in 0 μg/mL GO group, 1.0 μg/mL GO group, and 5.0 μg/mL GO group (with q values of 7.11, 8.99, and 14.92, respectively, P<0.01), and the migration rate of HUVECs in 5.0 μg/mL GO group was significantly lower than that in 0 μg/mL GO group and 1.0 μg/mL GO group (with q values of 7.81 and 5.33, respectively, P<0.05 or P<0.01 ). At 4 and 6 h of culture, the VEGF expressions of HSFs in the four groups were similar (P>0.05); at 8 h of culture, the VEGF expression of HSFs in 0.1 μg/mL GO group was significantly higher than that in 0 μg/mL GO group and 5.0 μg/mL GO group (with q values of 4.75 and 4.48, respectively, P<0.05). The GO-GelMA composite hydrogels in the four groups were all red liquid before cross-linking, which turned to light yellow gel after cross-linking, with no significant difference in fluidity. The GO in the GO-GelMA composite hydrogel of 0 μg/mL GO composite hydrogel group had no release of GO at all time points; the GO in the GO-GelMA composite hydrogels of the other 3 groups was partially released on 3 d of soaking, and all the GO was released on 7 d of soaking. From 3 to 14 d of treatment, the wounds of mice in the 4 groups were covered with hydrogel dressings, kept moist, and gradually healed. On 3, 7, and 14 d of treatment, the wound healing rates of mice in the four groups were similar (P>0.05). On 3 d of treatment, the MPU ratio of wound of mice in 0.1 μg/mL GO composite hydrogel group was significantly higher than that in 0 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group (with q values of 10.70, 11.83, and 10.65, respectively, P<0.05 or P<0.01). On 7 and 14 d of treatment, the MPU ratios of wound of mice in the four groups were similar (P>0.05). The MPU ratio of wound of mice in 0.1 μg/mL GO composite hydrogel group on 7 d of treatment was significantly lower than that on 3 d of treatment (q=14.38, P<0.05), and that on 14 d of treatment was significantly lower than that on 7 d of treatment (q=27.78, P<0.01). On 7 d of treatment, the neovascular density of wound of mice on 7 d of treatment was 120.7±4.1 per 200 times of visual field, which was significantly higher than 61.7±1.3, 77.7±10.2, and 99.0±7.9 per 200 times of visual field in 0 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group (with q values of 12.88, 7.79, and 6.70, respectively, P<0.01), and the neovascular density of wound of mice in 1.0 μg/mL GO composite hydrogel group and 5.0 μg/mL GO composite hydrogel group was significantly higher than that in 0 μg/mL GO composite hydrogel group (with q values of 5.10 and 6.19, respectively, P<0.05). On 7 d of treatment, cluster of new blood vessels in wound of mice in 0.1 μg/mL GO composite hydrogel group was significantly more than that in 0 μg/mL GO composite hydrogel group, and the new blood vessels were clustered near the GO; a large amount of VEGF was expressed in wound of mice in 0.1 μg/mL GO composite hydrogel group in the distribution area of GO and new blood vessels. Conclusions: GO with mass concentration lower than 10.0 μg/mL had no adverse effect on proliferation activity of HSFs, and GO of 0.1 μg/mL can promote the migration of HSFs and HUVECs, and can promote the secretion of VEGF in HSFs. In situ photopolymerized of GO-GelMA composite hydrogel dressing can promote the wound neovascularization of full-thickness skin defect in mice and increase wound blood perfusion in the early stage, with GO showing an enrichment effect on angiogenesis, and the mechanism may be related to the role of GO in promoting the secretion of VEGF by wound cells.

Effects of methacrylic anhydride gelatin hydrogel loaded with silver and recombinant human basic fibroblast growth factor on deep partial-thickness burn wounds in rabbits / 中华烧伤杂志

Objective: To investigate the effects of methacrylic anhydride gelatin (GelMA) hydrogel loaded with silver and recombinant human basic fibroblast growth factor (rh-bFGF) on deep partial-thickness burn wounds in rabbits. Methods: The experimental research method was adopted. Low-concentration GelMA materials, medium-concentration GelMA materials and high-concentration GelMA materials containing different concentrations of methacrylic anhydride (MA) were prepared, after adding photoinitiator, low-concentration GelMA hydrogels, medium-concentration GelMA hydrogels, and high-concentration GelMA hydrogels were obtained, respectively. The nuclear magnetic resonance spectroscopy was performed to detect the hydrogen nuclear magnetic resonance spectra of the above-mentioned three concentrations of GelMA materials, and to calculate the degree of substitution according to the spectrum diagram. The three-dimensional microstructure and pore size of 3 types of above-mentioned GelMA hydrogels were detected by field emission scanning electron microscopy (FESEM), with 9 samples measured. According to the selected concentration of MA, ten kinds of solutions of GelMA with different concentration of silver (silver-containing GelMA) were synthesized, and the silver-containing GelMA solution of each concentration was divided into three parts, and then exposed to ultraviolet light lasting for 20, 25, and 35 s, respectively. After adding photoinitiator,the corresponding silver-containing GelMA hydrogels were obtained. The residual degradation rate of silver-containing GelMA hydrogel with different photocrosslinking times was detected by collagenase degradation method at degradation of 12, 24, 36, and 48 h; and the time required for complete degradation was detected, and the sample number was 5. The inhibition zone diameter of GelMA hydrogel under above screened photocrosslinking times containing 10 concentrations of silver against Staphylococcus aureus was measured to reflect its antibacterial ability, and the sample numbers were all 5. The silver-containing GelMA hydrogel with statistical significance compared with the antibacterial circle diameter of the silver-containing GelMA hydrogel containing the lowest concentration (no silver) was considered as having antibacterial activity. The three-dimensional microstructure and pore size of the silver-containing GelMA hydrogels with antibacterial activity and the lowest drug concentration selected were detected by FESEM, and the sample numbers were all 9. The freeze-dried alone GelMA hydrogel and the freeze-dried silver-containing GelMA hydrogel were soaked in phosphate buffer solution for 24 h, respectively, then the swelling rate of the two GelMA hydrogel were calculated and compared by weighing method, and the sample number was 5. GelMA hydrogel containing silver and rh-bFGF, namely compound hydrogel for short, was prepared according to the preliminary experiment and the above experimental results. The appearance of the composite hydrogel was observed in general, and its three-dimensional microstructure and pore size were detected by FESEM. The deep partial-thickness burn wound was made on the back of 30 rabbits (aged 4-6 months, female half and half). Meanwhile, with the rabbit head as the benchmark, the wounds on the left side of the spine were treated as composite hydrogel treatment group, and the wounds on the right side were treated as gauze control group, and which were treated accordingly. On post injury day (PID) 3, 7, 14, 21, and 28, the healing of wounds in the two groups was observed. On PID 7, 14, 21, and 28, the wound healing area was recorded and the healing rate was calculated, with a sample number of 30. Data were statistically analyzed with analysis of variance for repeated measurement, one-way analysis of variance, and independent sample t test. Results: The substitution degree among low-concentration GelMA materials, medium-concentration GelMA materials, and high-concentration GelMA materials was significantly different (F=1 628.00, P<0.01). The low-concentration GelMA hydrogel had a loose and irregular three-dimensional spatial network structure with a pore size of (60±17) μm; the medium-concentration GelMA hydrogel had a relatively uniform three-dimensional spatial network and pore size with a pore size of (45±13) μm; the high-concentration GelMA hydrogel had the dense and disordered three-dimensional spatial network with a pore size of (25±15) μm, the pore sizes of 3 types of GelMA hydrogels were significantly differences (F=12.20, P<0.01), and medium concentration of MA was selected for the concentration of subsequent materials. The degradability of silver-containing GelMA hydrogels with different concentrations of the same photocrosslinking time was basically same. The degradation residual rates of silver-containing GelMA hydrogels with 20, 25, and 35 s crosslinking time at 12 h were (74.2±1.7)%, (85.3±0.9)%, and (93.2±1.2)%, respectively; the residual rates of degradation at 24 h were (58.3±2.1)%, (65.2±1.8)%, and (81.4±2.6)%, respectively; the residual rates of degradation at 36 h were (22.4±1.9)%, (45.2±1.7)%, and (68.1±1.4)%, respectively; the residual rates of degradation at 48 h were (8.2±1.7)%, (32.4±1.3)%, and (54.3±2.2)%, respectively, and 20, 25, and 30 s photocrosslinking time required for complete degradation of silver-containing GelMA hydrogels were (50.2±2.4), (62.4±1.4), and (72.2±3.2) h, and the difference was statistically significant (F=182.40, P<0.01), 25 s were selected as the subsequent photocrosslinking time. The antibacterial diameters of 10 types of silver-containing GelMA hydrogels against Staphylococcus aureus from low to high concentrations were (2.6±0.4), (2.5±0.4), (3.2±0.4), (12.1±0.7), (14.8±0.7), (15.1±0.5), (16.2±0.6), (16.7±0.5), (16.7±0.4), and (16.7±0.6) mm, respectively, and which basically showed a concentration-dependent increasing trend, and the overall difference was statistically significant (F=428.70, P<0.01). Compared with the silver-containing GelMA hydrogel with the lowest concentration, the antibacterial circle diameters of other silver-containing GelMA hydrogels with antibacterial ability from low to high concentration were significantly increased (with t values of 26.35, 33.84, 43.65, 42.17, 49.24, 55.74, and 43.72, respectively, P<0.01). The silver-containing GelMA hydrogel with the antibacterial diameter of (12.1±0.7) mm had the lowest antibacterial activity against Staphylococcus aureus and the lowest drug loading concentration, and the concentration of silver was selected for the concentration of subsequent materials. The microscopic morphology of the silver-containing GelMA hydrogel containing silver element with a pore size of (45±13) μm had a regular and linear strip-like structure. After soaking for 24 h, the swelling ratio of silver-containing GelMA hydrogel was similar to that of alone GelMA hydrogel. The composite hydrogel was colorless, clear and transparent, and its three-dimensional microstructure was a regular and uniform grid, with a filament network structure inside, and the pore size of (40±21) μm. On PID 3, a large amount of necrotic tissue and exudate of rabbit wound in composite hydrogel group were observed, and scattered scabs, a small amount of necrotic tissue and exudate of rabbit wound in gauze control group were observed. On PID 7, the area of rabbit wound in composite hydrogel group was significantly reduced, and adhesion of rabbit wound and gauze in gauze control group was observed. On PID 14, In composite hydrogel group, the rabbit wound surface was ruddy, and the growth of granulation tissue was observed, and in gauze control group, the rabbit wound base was pale, and the blood supply was poor. On PID 21, the rabbit wounds in composite hydrogel group healed completely, and rabbit wound in gauze control group had healing trend. On PID 28, new hair could be seen on rabbit wound surface in composite hydrogel group; oval wound of rabbit in gauze control group still remained. On PID 7, 14, 21, and 28, the wound healing areas of rabbit in composite hydrogel group were significantly larger than those in gauze control group (with t values of 2.24, 4.43, 7.67, and 7.69, respectively, P<0.05 or P<0.01). Conclusions: The medium-concentration GelMA hydrogel has good physical and chemical properties in terms of swelling and degradability. The screened silver-containing GelMA hydrogels had the lowest antibacterial activity and the lowest drug loading concentration. Composite hydrogel can significantly shorten the healing time of deep partial-thickness burn wounds in rabbits.

Effects of two different contact lenses on ocular physiological parameters and tear function tests / Efeitos de duas lentes de contacto diferentes nos parâmetros fisiológicos oculares e nos testes de função lacrimal

Abstract Objective: To investigate the effects of two types of contact lenses made of two different types of silicone hydrogel material on ocular physiological parameters and tear function tests. Methods: The contact lenses with the appropriate diopters were supplied to the volunteering patients. The patients were evaluated before wearing the contact lenses (visit0:V0), at the first month(visit1:V1) and at the thirth month(visit2:V2) following their wear. At all visits a detailed biomicroscopic examination was done, ocular physiological variables were collected, the tear function tests were performed and the tear meniscus area (TMA) was visualized and measured with anterior segment optical coherence tomography (AS-OCT). Results: The results of Schirmer 1 test were 12.07 ± 1.51 [9-16] mm for the right eyes (samfilcon A group) and 12.09 ± 1.5 [9-16] mm for the left eyes (senofilcon A group) at V0. (p=0.950) At V2, the mean Schirmer 1 test results were 11.92±1.34 [9-15] mm in the samfilcon A group and 12.2±1.41 [9-16] mm in the senofilcon A group (p=0.239). The mean TMA dimensions in the AS-OCT images were 338.42±47.1 [241-401] microns in the samfilcon A group and 338.42±47.1 [241-401]microns in the senofilcon A group at V0. (p>0.05). At V2, the mean TMA dimensions were 337.2±45.53 [241-402] microns in thesamfilcon A group and 340.31±48.22 [240-411] microns in the senofilcon A group (p=0.728). Conclusions: Our study has demonstrated that contact lenses containing samfilcon A and senofilcon A silicone hydrogel material do not cause meaningful ocular surface problems.

Resumo Objetivo: Investigar os efeitos de dois tipos de lentes de contacto feitas de dois tipos diferentes de material de hidrogel de silicone nos parâmetros fisiológicos oculares e testes de função lacrimal. Métodos: As lentes de contacto com as dioptrias apropriadas foram fornecidas aos pacientes voluntários. Os pacientes foram avaliados antes do uso das lentes de contacto (visita0: V0), no primeiro mês (visita1: V1) e no terceiro mês (visita2: V2), após o uso destas. Em todas as visitas, foi realizado um exame biomicroscópico detalhado, as variáveis fisiológicas oculares foram recolhidas, os testes de função lacrimal foram realizados e a área do menisco lacrimal (TMA) foi visualizada e medida com tomografia de coerência óptica do segmento anterior (AS-OCT). Resultados: Os resultados do teste de Schirmer 1 foram 12,07 ± 1,51 [9-16] mm para os olhos direitos (grupo samfilcon A) e 12,09 ± 1,5 [9-16] mm para os olhos esquerdos (grupo senofilcon A) em V0. (p = 0,950) Em V2, os resultados médios do teste de Schirmer 1 foram 11,92 ± 1,34 [9-15] mm no grupo samfilcon A e 12,2 ± 1,41 [9-16] mm no grupo senofilcon A (p = 0,239). As dimensões médias do TMA nas imagens AS-OCT foram 338,42 ± 47,1 [241-401] mícrons no grupo samfilcon A e 338,42 ± 47,1 [241-401] mícrons no grupo senofilcon A em V0. (p> 0,05).> Em V2, as dimensões médias do TMA foram 337,2 ± 45,53 [241-402] mícrons no grupo samfilcon A e 340,31 ± 48,22 [240-411] mícrons no grupo senofilcon A (p = 0,728). Conclusões: O nosso estudo demonstrou que as lentes de contacto que contêm material de hidrogel de silicone de samfilcon A e senofilcon A não causam problemas significativos na superfície ocular.

Biocompatibility of the bacterial cellulose hydrogel in subcutaneous tissue of rabbits

PURPOSE: To evaluate the biocompatibility and local sensibility reaction to bacterial cellulose hydrogel (0.8%) implanted in subcutaneous tissue of rabbits. METHODS: Fifteen New Zeland rabbits were randomly allocated into three groups: T1, 7 days, T2, 21 days, and T3, 84 days. The new material was implanted in the subcutaneous tissue of the ear; on the scalp over the periosteum; and on the outer and inner surfaces of the thighs, in the aponeurosis of the muscle. At 7, 21 and 84 postoperative days, the material was collected for histological study. The clinical signs, inflammatory response, angiogenesis and fibrogenesis were variables used for analysis of the biocompatibility and biological reactivity to BCH. Analyses were performed with an AXIO(r) Imager. The statistical tests were performed using the GraphPad Prism 5.0 program(r) RESULTS: The intensity of the inflammatory infiltrate, considering the different cell types (PMN, LMN and GC), was statistically significant, with group T1 different from groups T2 and T3 (p = 0.0124 and p <0.0001, respectively) and T2 different from the T3 group (p = 0.0007). Fibrogenesis grade 1 was the most prevalent in groups T1 (55.4%) and T2 (44.6%). The formation of neovascularization in the group was identified in 84.4% of samples. CONCLUSION: Bacterial cellulose hydrogel (0.8%) is biocompatible, integrating with the subcutaneous tissue of rabbits and inducing tissue remodeling. .

Therapeutic Options in Idiopathic Burning Mouth Syndrome: Literature Review

Introduction Burning mouth syndrome (BMS) is characterized by a burning sensation in the tongue, palate, lips, or gums of no well-defined etiology. The diagnosis and treatment for primary BMS are controversial. No specific laboratory tests or diagnostic criteria are well established, and the diagnosis is made by excluding all other possible disorders. Objective To review the literature on the main treatment options in idiopathic BMS and compare the best results of the main studies in 15 years. Data Synthesis We conducted a literature review on PubMed/MEDLINE, SciELO, and Cochrane-BIREME of work in the past 15 years, and only selected studies comparing different therapeutic options in idiopathic BMS, with preference for randomized and double-blind controlled studies. Final Comments Topical clonazepam showed good short-term results for the relief of pain, although this was not presented as a definitive cure. Similarly, α-lipoic acid showed good results, but there are few randomized controlled studies that showed the longterm results and complete remission of symptoms. On the other hand, cognitive therapy is reported as a good and lasting therapeutic option with the advantage of not having side effects, and it can be combined with pharmacologic therapy. .

The Effect of Poloxamer 407-Based Hydrogel on the Osteoinductivity of Demineralized Bone Matrix

BACKGROUND: Demineralized bone matrix (DBM) is used for bone healing due to its osteoinductivity, but it requires a carrier for clinical application. Here, we report the effects on the osteoinductivity of DBM by use of a poloxamer 407-based hydrogel as the carrier, compared to sterile water. METHODS: DBM-W and DBM-H represent 27 wt% of DBM with sterile water and DBM with a poloxamer 407-based hydrogel, respectively. Both of the compositions were applied to human mesenchymal stem cell (MSC) cultures, and monitored for alkaline phosphatase (ALP) staining and ALP activity. Six 10-week-old athymic nude rats were used for abdominal muscle grafting with either DBM-W or DBM-H, and were tested by plane radiography, microfocus X-ray computed tomography (CT), and decalcified histology to evaluate ectopic bone formation. RESULTS: The DBM-W group showed stronger ALP staining at 7, 14, and 21 days of treatment, and significantly higher ALP activity at 7 and 14 days of treatment, compared to the DBM-H group. Plane radiography could not confirm the radio-opaque lesions in the rat ectopic bone formulation model. However, ectopic bone formation was observed in both groups by micro-CT. Compared to the DBM-H group, the DBM-W group showed higher bone volume, percent bone volume and trabecular number, and the difference in percent bone volume was statistically significant. Decalcified histology found bony tissue with lamellation in both groups. CONCLUSIONS: Our results suggest that poloxamer 407-based hydrogel has efficacy as a DBM carrier since it shows ectopic bone formation, but its effects on the quality and quantity of osteoblastic differentiation in rat abdominal ectopic bone and MSC are considered negative.